3DDesign / BMW Brake pad

LESS DUST with PERFORMANCE

It can get stable brake performance from low temperature to high temperature range. Make brake dust reduce without dropping brake performance Designed to minimize disc to be worn down to help prolong the life of the brake discs.

PERFORMANCE IMAGE CHART

breakpads_グラフ

Performance brake pads

TYPE LD
BMW：F3x MP, F8x M, etc.

Front：1401-28211
Rear ：1401-28212

Applicable stages : For Street, Winding, Not for Circuit Materials : Non
asbestors-organic
Effective Temperature Range : 0-550℃
Coefficient of friction : 0.37-0.40

Brake Pad Product List

Manufactured by

dixcel_logo

WARNING

・Ensure fitment of these pads is carried out by a knowledgeable mechanic and in accordance with the car manufacturer’s service manual.
・Prior to fitting, ensure these pads are the correct model for your car. If they are not, do not try and fit them.
・Exceeding the pads’ stated temperature limits is very dangerous. Do not drive in a manner that overheats the pads.
・After fitment, take the time to bed in the pads and rotors. Full stopping power will not be available until this process is complete.
・Brake pads and rotors can get extremely hot after driving. Please wait until they have cooled down to fit new ones.
・Always change both left and right brake pads at the same time. Only changing one side will lead to uneven braking (where the car pulls to one side) and is extremely dangerous.
・If the car exhibits any problems during driving, pull over immediately and check the area where the problem is coming from.
・Continuing to use these pads past their wear limit will result in reduced braking power, damage to your brake rotors and potentially cause an accident. Always change your brake pads at the correct time.

CAUTION

・After fitting, check your brake calipers, lines and rotors to ensure they have been refitted properly. Ensure nothing is loose and there are no rattles.
・After fitting, and before driving the car, press down on the brake pedal multiple times and check there are no issues and that the pedal is firm under pressure.
・These pads’ friction compound contains metallic particles. As there is a risk of these particles penetrating the skin, please wear gloves when handling them.
・Until fitting, store in a cool, dark place, away from any humidity or direct sunlight. Do not throw or drop the pads.
・Before fitting, ensure there are no abnormalities with the pads.
・None of our brake pads use any asbestos.