Professional Gauges

■When you need to monitor the engine condition not only on the track but also on the road. the 3DDesign gauge pods allow to install the STACK gauges without spoiling BMW modern interior.
3DDesign is a dealer of the STACK gauges in Japan.

■Gauge pod for STACK 52mm gauge

1, 2 series, M2 / F20, F22, F87

Application :
F20/22/87(For non LCI car only)
P/N :
6201-22011
Description :
The ashtray can not be used, after installing the gauge pod.The pet bottle in the cup holder may hits the gauge pod.
 

3, 4 series, M3,M4 / F3x, F8x

Application :
F30,F31,F32,F34,F36,F80,F82
P/N :
6201-23011
Description :
The ashtray can not be used, after installing the gauge pod.
The pet bottle in the cup holder may hits the gauge pod.

Z4 / E89

Application :
E89
P/N :
6201-18911 Discontinued
Description :
 
It needs to remove the ashtray and power socket to install the gauge pod.
The far side gauge is not visible much because of hiding by gearshift.

MINI / R55,56

Application :
R55, R56, R58, R59,
P/N :
6201-75611 (a pair) Discontinued
Description :

The gauge pods were designed for the STACK 52mm gauge.

ST3300 series Stack Gauges - 52mm

■Professional Stepper Motor Analogue

These precision auxiliary instruments combine digital microprocessor accuracy with a high-precision stepper motor needle movement, to provide a new level of accuracy and reliability in 52mm gauges.

■Water Temp.

Range
40 - 120℃
P/N :
6202-ST3307

■Oil Temp.

Range
40 - 140℃
P/N :
6202-ST3309

■Oil Pressure

Range
0 - 7BAR
P/N :
6202-ST3301

■Boost Pressure

Range
-1.0 - 2.0BAR
P/N :
6202-ST3311

■Battery Voltage

Range
8 - 18V
P/N :
6202-ST3316

ST3500 series Stack Gauges - 52mm

■STACK 52mm Pro-Control Gauges

■Stack Pro Control Stepper Motor range of analogue gauges are user configurable with Maximum/Minimum alarms which can be set with one of seven different colours to indicate status.

■Water Temp.

Range
40 - 120℃
P/N :
6202-ST3507

■Oil Temp.

Range
40 - 140℃
P/N :
6202-ST3509

■Oil Pressure

Range
0 - 7BAR
P/N :
6202-ST3501

■Boost Pressure

Range
-1.0 - 2.0BAR
P/N :
6202-ST3511

■Battery Voltage

Range
8 - 18V
Part No. :
6202-ST3516

■Sensor adapter

Sensor adapters, it allows to connect the sensor of the stack gauge and BMW, it was designed based on Japanese spec engine.

■AdapterA

To the hole of factory sensor.

P/N :
6203-01A

M12-P1.5_1/8NPT

■AdapterB

To the hole of factory sensor.

P/N :
6203-01B

M12-P1.5_1/8NPT

■AdapterC

To the hole of factory sensor.

P/N :
6203-01C

M12-P1.5_1/8NPT

■AdapterD

To the hole of factory sensor.

P/N :
6203-01D

M12-P1.5_1/8NPT

■AdapterE

To the oil drain hole.

P/N :
6203-01E

M12-P1.5_1/8NPT

■AdapterG

φ30mm/34mm/38mm available

P/N :
6203-01G##

■AdapterH

To the oil filter cap for S52, S54　etc..

P/N :
6203-01H

■AdapterJ

To the Boost sensor for R55, R56, N13 etc.

P/N :
6203-01J

■AdapterK

To the Boost sensor for N55, N20

P/N :
6203-01K

■AdapterL

To the oil block for N55

P/N :
6203-01L

■Adapter application list


Model ENGINE W Tmp. O Tmp. O Prs. Boost DESC.
F20 M135i N55B30A A L B K  
120i N13B16A G30 N/A N/A J  
116i N13B16A G30 N/A N/A J  
F22 M235i N55B30A A L B K  
E82
E87
E88		 135i N54B30A A E B -  
116i N45B16A C A N/A 2 sensors are on "A" at once.
118i N46B20B C A N/A 2 sensors are on "A" at once.
120i N46B20B C A N/A 2 sensors are on "A" at once.
130i N52B30A A E B N/A  
F30
F31
F34

F80		 320i N20B20B A N/A B K  
328i N20B20A A N/A B K  
335i N55B30A A L B K  
M3 S55B30A A - B K  
F32
F36

F82		 420i N20B20B A N/A B K  
435i N55B30A A L B K  
M4 S55B30A A - B K  
E90
E91
E92
E93		 320i N46B20B C A N/A 2 sensors are on "A" at once.
320i N43B20A C A N/A 2 sensors are on "A" at once.
323i N52B25A C E B N/A  
325i N52B25A A E B N/A  
330i N52B30A A E B N/A  
335i N54B30A G38 E B -  
M3 S65B40A G34 N/A D N/A
E46 M3 S54B32 G38 H N/A 2 sensors are on "A" at once.
3xxi M54 G38 E D    
E36 M3 S50,S52 G38 H N/A 2 sensors are on "A" at once.
E89 Z4 35i N54B30A G34 E B - Needs to cut engine cover
Z4 23i N52B25A A E N/A N/A  
Z4 20i N20B20A A N/A B K  
E85
E86		 Z4M S54B32 G34 H N/A 2 sensors are on "A" at once. .
Z4 M54 G38 E D    
MINI R56   G30 N/A N/A J Cooper-S

■What's「STACK」


The Stack brand has a heritage firmly founded in Formula One and a reputation built on many years of racing pedigree. Their first product was Recording Tachometer, which in it's day provided the only on-vehicle solution for accurate, digital RPM display and engine parameter logging. As a direct result, this unit soon gained widespread acceptance with the Formula One teams. Their philosophy is to lead the way in using new technologies in innovative ways to provide their customers with more advanced and quality engineered products.

The adapters were designed based on Japanese spec engine, the adapters are not confirmed with world wide yet.