Track-oriented Brembo GTS caliper and
Type3 rotor 3DDesign with independent
calipers and brackets for side brakes
Twin caliper brake kit that can be installed
with a bell housing.

Type

G8x/380ｘ28 T3 GTS

SKU

1426-38241G

Desc.

Due to the thickness of the bell housing, the wheel mounting surface is offset to the outside of the vehicle by 1mm from the stock one. There is no interference with the carryer of the stock 20-inch wheels, but please check the drawings for the production wheels. Cannot be installed at the same time as 18-inch wheels. For installation, it is necessary to cut part of the back plate.